 |
 |
|
SERVO CONTROLLED VOLTAGE STABILIZER |
The highly fluctuating AC mains supply is very common phenomenon in India. The difficulties caused by them are known too well and need not be enumerated.
Unsteady voltage supply conditions result in total breakdowns of sensitive and sophisticated equipments. To ensure the stabilized voltage, SYSTEMS CREATOR have developed the Servo Controlled Voltage Stabilizer confirms to IS 9815. |
Features : |
|
High power efficiency > 95%
|
|
Ultra fast correction rate 44V / sec |
|
+1% regulation from no load to full load |
|
Waveform distortion NIL |
Wider rang of input voltage:
|
|
For single phase: 170V - 270V, 150V -270V (optional) |
|
For three phase : 360V - 460V, 300V - 460V (optional) |
Output voltage :
|
|
For single phase: 230V + 1%, 220V + 1%
|
|
For three phase: 415V + 1%, 400V + 1% |
|
Built in Line Fault Indicator
|
|
Under voltage / over voltage cut off with indication. |
|
Over load protection |
|
Spike Suppressor (optional) |
|
Auto / manual selection (optional) |
|
Single phase preventor (optional) |
|
Delay start to avoid initial surges (optional) |
|
Phase reversal protection (optional) |
Single phase
Model |
Rating |
load |
Dimension
(W*H*D mm ) |
SC 101 I |
1KVA |
4Amp |
250 * 270 * 410 |
SC 201 I |
2 KVA |
8Amp |
250 * 270 * 410 |
SC 301 I |
3 KVA |
12Amp |
250 * 270 * 410 |
SC 401 I |
4 KVA |
16Amp |
250 * 270 * 410 |
SC 501 I |
5 KVA |
20Amp |
250 * 270 * 410 |
SC 751 I |
7.5 KVA |
28Amp |
340 * 350 * 560 |
SC 1001 I |
10 KVA |
40Amp |
360 * 390 * 870 |
SC 1501 I |
15 KVA |
60Amp |
360 * 390 * 870 |
SC 2001 I |
20 KVA |
80Amp |
520 * 470 * 820 |
Three phase
Model |
Rating |
Max load
Per phase |
Dimension
(W*H*D mm ) |
SC 303 I |
3KVA |
4Amp |
320 * 320 * 670 |
SC 603 I |
6 KVA |
8Amp |
320 * 320 * 670 |
SC 903 I |
9 KVA |
12Amp |
350 * 1150 * 460 |
SC 1203 I |
12 KVA |
16Amp |
350 * 1150 * 460 |
SC 1503 I |
15 KVA |
20Amp |
350 * 1150 * 460 |
SC 3003 I |
30 KVA |
40Amp |
830 * 1400 * 460 |
SC 4503 I |
45KVA |
60Amp |
520 * 1430 * 820 |
SC 6003 I |
60 KVA |
80Amp |
1300 * 1530 * 520 |
*SC 7503 I |
75 KVA |
100Amp |
1500 * 1350 * 820 |
*SC 15003 I |
150 KVA |
200Amp |
1500 * 1350 * 1000 |
*Oil Cooled
| Application : |
Medical equipment, Industrial Machines, Motors, CNC Machines, Laser Machines, and Inductive load. |
Used at : |
Factories, shops, laboratories
Due to continuous research and development the specification are likely to chang without prior information. |
|
 |
 |
|
|
|
